DIY Pre-mixed Cornice Cement
Mixed and ready-to-go, Gyprock DIY Pre-mixed Cornice Cement is used for fixing Gyprock cornice at wall and ceiling junctions on plasterboard or fibre cement substrates.
Typical Applications
Pre-mixed Cornice Cement is typically used to install cornice between plasterboard walls and ceilings. it is also suitable for repairing existing cornice and cornice joints and is easily applied with a small broadknife.
DIY Pre-mixed Cornice Cement is a ready-to-use drying type compound that provides superior adhesion with good initial grab and high bond strength. This water based product is easy to clean up and the pack can be resealed for later use.
Freshen your style with Gyprock Cornice
The comprehensive Gyprock cornice range helps you add designer touch to any home. Whether you’re installing it yourself using Pre-mixed Cornice Cement or specifying a profile to your builder, you’re sure to find a style that brings character to the various spaces in your home.
Product Options
Gyprock DIY Cornice Cement is available in a 6kg bucket with a shelf life of 1 year from date of manufacture.
For product availability and to place an order, contact you nearest supplier.
Physical & Chemical Properties
| Specific gravity (H20=1) | 1.6 – 2.0 |
| VOC content (as specified by GBCA) | < 10g/L as VOC content per material |
Product Manufacture
Gyprock Pre-mixed Cornice Cement is manufactured by CSR Gyprock in Australia to stringent product specifications.
Product Handling
Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.
Storage: Store buckets of compound in a dry environment out of direct sunlight. Remove lid and stir prior to use. Unused product should be stored by resealing the original bucket. Remix prior to use. Discard if drying has commenced.
Health and Safety
Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.
Installing to Standards
AS/NZS2589: Gypsum linings – Application and Finishing outlines the procedures for jointing and finishing of Gyprock plasterboard in conjunction with additional details contained in Gyprock Technical Literature.
Resources
Gyprock makes available resources that provide comprehensive selection, design, installation and maintenance guidance.
Product Enquiry
Would you like to know more about this product? Please fill out the form below and one of our freindly team members will get back to you shortly.
